| Bus Type |
PICMG 2.0 compliant PCI/ISA bus |
| System
chipset |
Intel 440BX AGPset |
| Processor |
- Intel Pentium III & II up to 800MHz (Slot 1)
- Rear flush mounted |
| Clock
generator |
IC WORKS, closck generator & clock buffer
Process bus supports Pentium III & II processor at 66/100MHz |
| Main memory |
- Two 25-degree, 168-pin DIMM and enhanced fixed sockets
- Support up to 512MB 66/100MHz SDRAM
-L2 cache - Provided by Pentium III/II processor |
| Video |
- Cirrus Logic CL-GD5465 high performance 3D AGP graphic accelerator
- 4MB high speed Rambus DRAM (RDRAM)
- Resolution up to 1600 x 1200
- True color operation up to 1024 x 768
- On-board 15-pin D-type connector |
| LAN |
- Realtek 8139A 10/100Mbps Ethernet controller
- On-board RJ45 connector with LINK LED indicators |
| SCSI |
- Adaptec 7880 Ultra-wide SCSI controller
- On-board 68-pin Wide SCSI connector |
| BIOS |
- AWARD flash PnP BIOS
- Year 2000 compliant
- Power management |
| IDE
controller |
- Ultra DMA/33, support two PCI-bus master enhanced IDE channels
- Supports up to 4 devices |
| DMA
controller |
- Two 82C37 enhanced DMA controller
- Supports PCI DMA with 3 PCI/ISA channels and distributed DMA protocols |
| Interrupt
controller |
Two 82C59, supports 15 levels interrupt |
| USB interface |
Two USB 1.0 ports, 8-pin connector |
| Real time
clock |
- Built-in-chip 256-Byte batter-backup CMOS SRAM
- Powered by non-rechargeable lithium battery |
| Timer |
Based on 82C54 |
| Multi I/O |
- Winbond W83977TF I/O controller
- Two RS-232 (COM1 & COM2) ports, high speed 16550 compatible UARTs with 16-byte
send/receive FIFOs
- One 34-pin FDD connector supports up to two floppy devices
- One bi-directional parallel port supports EPP/ECP mode
- One keyboard connector (PS/2 type)
- One mouse connector (PS/2 type) |
| Watchdog
timer |
0 – 63sec. software programmable |
| Board type |
6-layer PCB, single-side SMT design |
| Operating
system |
DOS 6.22, MS Windows 95/98/NT, OS2 |
| Environment |
- Operating temperature: 0-60? (32-140?)
- Storage temperature: -20-80? (-4-176?)
- Relative humidity: 5%-95% (Non-condensing) |
| Power
requirement |
29W (with Intel Pentium II 350MHz processor) |
| Certification |
CE Mark |
| Dimension |
340mm x 122mm (13.4" x 4.8") |
Formosa Industrial
Computing
Rear flush-mount processor and tilted SDRAM
mounting for superior space efficiency, heat dissipation, and weight distribution
Mark
